高工作电压小工作电流实验室检测报告仪（耐弧光实验室检测报告仪）-（电脑调整）

High voltage low current tester (arc resistance tester) - (computer control)

品牌品牌：耐电弧试验机

Product name: electric arc resistance tester

成品技术参数：NDH-A

Product model: NDH - A

无法标准单位：GB/T 1411-2002《固态物体耐压涂料耐高压得过低感应电流电弧焊接发出电的耐压》（共同IEC  61621-1997）及ASTM D495等规定要求的规定要求制定研制的，并适合IEC 149、UL 746A等耐压试验技术

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

关键应用面积及实用功能：

本实验设计机是遵循应该用在变频电动机、小家电元件和家居居民用小家电元件等业内的电工维修用塑、树酯胶和电隔热性电阻性漆等电隔热性电阻性装修物料的耐弧光焊接性考评，主用在固态垃圾电隔热性电阻性装修物料如：塑、聚酯薄膜、树酯、云母片、淘瓷、夹层玻璃、电隔热性电阻性油、电隔热性电阻性漆、瓦楞纸板等媒质的耐弧光焊接性测试软件；

本试验台机由求算机抑制运转，能够展现特定實驗所动态及實驗所时间段，實驗所尾声后并维持特定實驗所数剧，并可缩印.标淮实验所统计。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 滤油机为上上下下分离式组成，上方为运作系统化，上方为冲击恒温恒湿试验箱。

2 本厂品按照*新智慧设定技巧，能够 选取程序流程（IEC或ASTM）可全自动对其进行试验台，并在手机上上现示做实验的时候操作过程和然而。

3 **性能参数保持良好，抗干挠学习能力强，检查精度等级高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧放电通断時间误差值：值为 ±10ms

2 调压器功率：2kVA

3 功率测试的电压：12.5kV

4 耐压试验输出功率高精度：±3%

5 直流电压把控gps精度：±10%  电流量估测误差：1.5%

6 金属电极对试件压：（0.5±0.05）N

7 电极片的材料：钨棒

8 电极材料路程：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 操作自然环境湿度：（23±2）℃

10 适用环镜干湿度：（50±5）%

11 供电：220V±5%  50Hz  10A

12 测试    的方式：   新国标/美标/10 mA 持续/20 mA 连继/30 mA重复/40 mA持续

13 试验检测执行程序详细：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 货品型号查询：

NDH-A    耐弧光试验台仪-微机掌控

NDH-B    耐电弧焊接检测仪-接触屏管控

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！